Constant temperature and pressure environmental testing equipment
We have installed a constant temperature and pressure chamber and are conducting environmental tests (high and low temperature tests, temperature and altitude tests).As described in the features section, it is characterized by having F450mm through-ports on the side and F300mm through-ports on the door surface.
By using the port on the side, the load application device for the specimen can be installed outside the chamber.
1. A room temperature load device can be used.
2. The inside of the chamber can be effectively used as an operating area for the specimen.
In addition, by using the port on the door, it is possible to test specimens that exceed the depth dimensions inside the chamber when operating in high and low temperature environments.
Photo of the temperature chamber exterior
| Specifications of pneumatic impact testing machine | ||||
|---|---|---|---|---|
| No. | Item | Specification | ||
| 1 | Pressure Range | 1.01 bar (atmospheric pressure) to 0.04 bar | ||
| 2 | Temperature range | －70~＋180℃ | ||
| 3 | Temperature control range | ±0.5℃ | ||
| 4 | temperature distribution | ±2℃ | ||
| 5 | Allowable heat output | 1kW at -70℃ | ||
| 6 | Tank interior dimensions | W1.44m×H1.44m×D2.0m | ||
| 7 | Floor rail load capacity | 2000kgf | ||
| 8 | Features | (1) A port for attaching a jig of F450 mm is provided on the side. The test specimen in the chamber can be inspected from outside the chamber (room temperature environment). The structure allows for load bearing. (2) A 300mm F port for the test specimen is provided on the door surface. The depth (D) of the specimen when it is operating under the temperature environment is The structure allows testing of specimens that exceed the dimensions. |
||
Contact Us
Contact Us